This IKEA Pax Hack Affords Constructed-In Storage and a Desk

Flip a clear wall proper right into a hardworking home office with this DIY built-in workstation, which takes a pair of conventional IKEA Pax wardrobes and hacks them to look additional high-end—and to assist a desk. This IKEA hack is completely adaptable, so you might determine irrespective of colors, panel coverings, handles, desk flooring, and further that you just must make the DIY completely your particular person.

About This IKEA Hack

The enterprise begins with a pair of IKEA Pax wardrobes, which will be present in numerous sizes and configurations, to create closed-door storage for office offers, paperwork, and further. Between the cabinets, a sheet of plywood mounted to the wall varieties an setting pleasant desktop flooring. The same old prime for a desk is 30 inches, nonetheless you might arrange your flooring 44 inches from the bottom for standing desk prime or 36 inches for counter prime.

Personalize the Pax wardrobes with a coat of paint (we chosen Chimichurri CSP-810 from Benjamin Moore) and textural wallpaper contained within the door insets.

Blaine Moats


Gives

  • Spherical or desk observed
  • Clamps
  • Very good-grit sandpaper
  • Tack cloth
  • Angle paintbrush
  • Drill/driver
  • Crafts knife
  • Extreme-density mini foam roller
  • 1 2×4-foot sheet of three/4-inch maple plywood
  • 1 8-foot 1×3 maple board
  • Picket glue
  • Water-base clear coat (We used Minwax Polycrylic.)
  • 2 IKEA Pax wardrobes (39 3/8 x 23 5/8 x 79 1/4 inches)
  • Primer made for shiny surfaces (We used Sherwin-Williams PrepRite ProBlock.)
  • Semigloss paint (We used Sherwin-Williams Skilled Industrial DTM Acrylic Coating color-matched to Chimichurri.)
  • 1 1/2-inch wood screws
  • Metallic bracket
  • Grass-cloth wallpaper
  • Crafts glue
  • Cabinet {{hardware}}

Instructions

1. Measure and Scale back Plywood

Measure and reduce the plywood to 21-3/4×48 inches. Scale back the 1×3 into one 48-inch-long nostril piece and two 20-inch cleats. This stuff will kind your tabletop.

2. Assemble Tabletop

Using wood glue and clamps, join the nostril piece to not less than one prolonged side of the tabletop with edges flush. Allow to dry 24 hours. Take away the clamps, and sand the ground until straightforward. Take away mud with a tack cloth.

3. Apply Clear Coat

Apply clear coat to the tabletop using a high-quality angle brush. You will need to brush in a single path with the grain. Let dry for 2 hours, after which calmly sand to remove air bubbles.

4. Paint Wardrobes

Using fine-grit sandpaper, powerful up the tip of the unassembled wardrobe parts and doorways. Wipe away mud with a tack cloth. Prime all wardrobe parts and the cleats from Step 1. After the primer has fully dried, paint the entire primed gadgets, allowing to dry between coats.

5. Assemble and Place Wardrobes

After the paint is cured, assemble the wardrobes in line with the producer’s instructions, nonetheless depart off the doorways. Place the wardrobes in direction of the wall 48 inches apart.

6. Join Cleats

Measure 29-1/4 inches from the bottom and draw a level line on every wardrobes to mark the tabletop placement. Join cleats instantly beneath the traces, screwing in from the within of the wardrobes.

7. Secure Tabletop

Place the tabletop on the cleats. Screw by the use of the underside of the cleat into the underside side of the tabletop to be able to not disturb the tip on the very best. In order so as to add stability, arrange the metallic bracket proper right into a stud or using drywall anchors. Join tabletop to bracket.

8. Finish Wardrobes and Customise

Arrange the wardrobe doorways, and add desired {{hardware}}. Trim wallpaper to go well with contained within the door insets and cling with crafts glue. Customise the interiors with organizers to boost storage capabilities.

As quickly as your new workspace is constructed, you might improve its group by outfitting the interiors with a combination of cupboards, baskets, drawers, and completely different storage tools. Add course of lighting and work throughout the work house for a helpful office that isn’t an eyesore.

Bài viết liên quan